Primary Jaw Crusher

"CRUSHPOWER" Primary single toggle jaw crushers are suitable in quarry production lines, mineral and ore crushing plants. It can be described as obbligato machine in mining, building construction, construction wastes crushing, Hydropower and Water Resource, railway and highway construction and some other industries.

CRUSHPOWER single toggle jaw crushers have an Flat Elliptical Motion providing the swing jaw to increase its crushing efficiency at different CSS(close side setting) also the long swing jaw length means more higher reduction ratio. Primary jaw crushers means large feed opening with high reduction ratio.

Technical Details

Modal Feed Opening
(mm)		 Max. Feeding
(mm)		 Discharge OPening
(mm)		 Capacity
(T/H)		 REV
(R/Min)		 Power
(kw)
12 x 24 300 x 600 250 40 - 60 25 - 35 220 37.5
15 x 24 375 x 600 300 50 - 70 30 - 40 280 37.5
18 x 24 450 x 600 350 50 - 70 35 - 45 280 37.5
15 x 30 375 x 750 310 50 - 80 40 - 60 280 45
20 x 32 500 x 800 425 50 - 100 60 - 80 250 45
24 x 32 600 x 800 500 50 - 100 60 - 85 250 45
24 x 36 600 x 900 500 65 - 125 80 - 100 250 75
28 x 36 700 x 900 630 80 - 150 92 - 110 250 75
32 x 42 800 x 1050 700 95 - 250 150 - 200 230 112.5
36 x 42 900 x 1050 800 100 - 250 175 - 225 230 112.5

Note

  • Designs and specifications are subject to change without prior notice.
  • Dimensions are intended only as guide for preliminary planning of the installation and should not be used for construction of foundation etc.
  • All rights are reserved by us to change the dimension without any prior notice what so ever.
  • The Output in TPH indicate above is based on average hard dry quartz weighing one at least 1.6 ton/m3 when crushed and on continuous feed of graded sizes with fines removed.
  • Capacities may vary by 25% depending on type of rock, gradation and method of feeding.
  • Where no capacity rating is given in the table, it is generally not economical to operate at such a setting.

© Copyright to CRUSH POWER. All Rights Reserved | Designed & Developed by IWT