Grizzly Vibrating Feeder

CRUSHPOWER Vibrating Feeder is a kind of linear-direction feeding equipment, in the mineral ore & rocks processing plants, it can send materials to crusher evenly and continuously. At the same time, it can screen materials roughly, increasing the practical handling capacity of the whole production line.heavy-duty feeders have good performance in the mining. The Grizzlies are normally used to remove "undersize" before primary or secondary crushing. The width of a Grizzly should be about 3 times that of the largest piece of material. The bars are usually iron or steel castings, tapered towards the lower end to avoid clogging.

Technical specification of Shaft Mounted Feeders

Modal Max Feeding
(mm)		 Capacity
(T/H)		 Power
(kw)
(with vibro motor)		 Power
(hp)
(shaft driven motor)
VGF 2200 x 700 350 30 - 50 1.1 x 2 7.5 hp
VGF 3100 x 800 350 60 - 80 2.2 x 2 10 hp
VGF 3100 x 1100 500 70 - 100 4.3 x 2 15 hp
VGF 4100 x 1100 700 125 -200 4.3 x 2 20 hp

Note

  • Designs and specifications are subject to change without prior notice.
  • Dimensions are intended only as guide for preliminary planning of the installation and should not be used for construction of foundation etc.
  • All rights are reserved by us to change the dimension without any prior notice what so ever.
  • The Output in TPH indicate above is based on average hard dry quartz weighing one at least 1.6 ton/m3 when crushed and on continuous feed of graded sizes with fines removed.
  • Capacities may vary by 25% depending on type of rock, gradation and method of feeding.
  • Where no capacity rating is given in the table, it is generally not economical to operate at such a setting.

© Copyright to CRUSH POWER. All Rights Reserved | Designed & Developed by IWT